|
At
Master Spas, they understand the importance of peace of mind. That's why they developed a complete spa purification system for clean, pure water that could pass the NSF standards for drinking water. And best yet,
their system uses the same techniques as Mother Nature, without adding significant amounts of chemicals.
Stage 1: Macro Pre Filter.
 The Macro Filtration stage uses a macro or coarse filter, similar to a natural gravel filter, to remove all large contaminants and debris that enter the filter area. This allows for higher flow rates through the filters and increases the life of the cartridge.
Stage 2: Micro Scrubbing Filtration.
The Micro Scrubbing Filtration stage uses two micro or fine filter elements, similar to sand and silt filters, to scrub the water by removing the finer particles.
Stage 3: Eco Pur Polishing Filters.
This stage helps destroy bacteria, algae and fungi that may be present, using a mineral process that has been approved as a safe and effective treatment for drinking water. This stage also reduces excess chlorine or bromine after chemical shock.
Stage 4: Ozonation.
Our system uses a high output Corona Discharge Ozone generator to ensure that any remaining bacteria or metals will be completely destroyed.
The Advantages of Mineral Purification
-
Destroys most bacteria, pathogens, algae and fungi
-
Removes heavy metals like lead and mercury from water
-
Removes calcium carbonate and hydrogen sulphide from spa water to protect heaters & equipment from precipitation
-
Helps stabilize the pH and alkalinity of the spa water
-
Reduces 95% of chemical usage and still provides safe odor-free water
-
Depletes excess chlorine after chemical shock to prevent damage to hair and swimwear
-
All-natural, environmentally safe sanitizing system that does not require chemical registration with the EPA
-
Produces ultra clean, clear water
-
Requires maintenance only after usage
|
